MODEL 102 SPECIFICATION  SHEET

Model 102 with heads and sensors

Species measured:
Organics and inorganic species that can be ionized by the UV lamp (9.5, 10.2, 11.7)
Detector:
PID
Performance:
Isobutylene Referred
Accuracy:
99+/- 5%- depends upon the accuracy of the calibration gas
Precision: 
+/- 1% of reading
Electrical classification: 
Designed for Class I, Div.I
Response time:
<1 sec. to 90% response
Sample flow rate:
>0.2 LPM
Zero Drift:
<1% over 24 hours
Span Drift:
<2% over 24 hours
Range:
0.1 to 3000 or to 30,000 ppm with dilution probe (isobutylene referred; may vary with different compounds)-see below
Linear Range:
To 3,000 ppm direct reading
Readout:
Digital - 5 1/2 digits
Power requirements:
100V, 115V, 220V, 240V; 50/60 Hz for recharging battery
Battery: 
Nickel metal hydride
Power consumption: 
< 1 watt maximum
Dimensions:
8 " L x 3" W x 2.25" D
Weight:
1.9 pounds; 0.86 Kg
Instrument operating conditions: 
5-40o C, 0-95% RH (non-condensing)
Outputs:  
RS232
 
Ordering Information
     
Catalogue Number  
Description
     
HNU -102
The Model 102 Snap-On PID™ Photoionization Analyzer is a single piece, hand-held unit for the measurement of organic and inorganic species that can be ionized by the UV lamp (9.5, 10.2, 10.6, 11.7). This includes the choice of one (1) Snap-On Module (9.5, 10.2, 10.6, 11.7 eV lamp), Operator's Manual, and Rechargeable Nickel Metal Hydride Battery.
Single Unit Construction

- 8.0" L x 3" W x 2.25" D
- Weight: 1.9 lbs.
- Simple 5 button operation; no keyboard required
- Library of sensitivities built in for mor than 200 compounds
- Alphanumeric display for compound, sample point, mode
- Linear to 3,000 ppm without dilution probe (with dilution probe linear to 20,000 ppm).
- LCD digital display
- Fast response (1 sec to 90%)
- Datalogging for more than 7,000 points
- Duraclean™ PID
- RS232 Output
- Auto-electronic zero, background zero
- Simple push-button sensitivity control.

* please specify when ordering if an 9.5 eV, 10.2 eV, or 11.7 eV lamp is required instead of the standard 10.2eV lamp.
Options
     
Catalogue Number  
Description
   
9.5 SNAP-ON
(module only)
9.5 Snap-On Module for addition to existing docking module.
10.2 SNAP-ON
(module only)
10.2 Snap-On Module for addition to existing docking module.
10.6 SNAP-ON
(module only)
10.6 Snap-On Module for addition to existing docking module.
11.7 SNAP-ON
(module only)
11.7 Snap-On Module for addition to existing docking module.
81-102-095
Replacement 9.5 eV lamp for HNU-102
81-102-102
Replacement 10.2 eV lamp for HNU-102
81-102-117
Replacement 11.7 eV lamp for HNU-102
81-102-BATTERY
Replacement NiMH Battery for HNU 102
81-102-CHARGER
Replacement Battery Charger for HNU-102
102 CARRY CASE
Model 102 Carrying Case
81-101-352 Calibration Kit: includes one span gas cylinder (isobutylene) and regulator.
81-102-Dilution 10:1 Dilution Probe for 102 - increase linear range to 30,000 ppm

PID Analyzers' Extended Warranty is available with the purchase of new units. Call our service department for information about our comprehensive maintenance program for existing units.

Ask about our Maintenance Contracts to insure your units are in good working condition. We warranty our work, and shipping is included with every contract, call the sales department today, or go to our distributor list to find an authorized factory representative in your area.!

PID trade-in program available. Please contact sales@hnu.com for more information on this program.
 
Our Company

For further information on pricing and availabilty call PID Analyzers at 1-(508) 660-5001 and ask for customer service.

To order, call us toll-free at 1-(800) 724-5600.

Specifications subject to change without notice PFS1191 

© 2003 PID Analyzers, LLC. All Rights Reserved.